Comments for HumpA Blog

Comment on RaspberryPi, MQTT, Mosquitto & Arduino by piko

piko — Mon, 08 Apr 2013 18:49:08 +0000

Hi there, thanks for tutorial, but when i start mosquitto on rasPI, im getting an error:
mosquitto version 1.1.2
using default config
opening ipv4 listen socket on port 1883
error: address already in use
?? please advise

Comment on RaspberryPi, MQTT, Mosquitto & Arduino by Comparator

Comparator — Fri, 15 Mar 2013 11:14:07 +0000

We made the project with its own broker PLC and a bridge between MQTT-S and MQTT systems.
Work on Windows or Linux + Mono.
For Example: Raspberry Pi + ArchLinux + Mono.
As Hardware used: Arduino nano compatible boards plus RFM12 or CC1101 Shield.

Look at X13home.github.com

Best Regards

Comment on Arduino Home Automation Remote! by Humpa

Humpa — Wed, 13 Feb 2013 20:59:32 +0000

Hello Sam,

thank you, sorry for the slow reply I have been busy with family stuff.

You press the button on the relay and it will learn the messages transmitted by the Arduino.

So basically you need an Arduino sketch which sends the code you want over the 315Mhz transmitter at the same time holding the learning button on the adaptive Relay.

If you are still stuck, email me humpadilly(at)humpadilly.com and I will try to help you.

Regards
Humpa

Comment on HomeZone / Cinema Update 6 – Web App Control by Humpa

Humpa — Wed, 13 Feb 2013 20:59:12 +0000

Hello Luis

Sorry for the slow reply, I have been a little busy with family stuff.

The code does not run on the Arduino, it needs to run on another server… I am using a Raspberry Pi as a webserver for the Sencha app.

Regards
Humpa

Comment on Arduino Home Automation Remote! by Sam

Sam — Fri, 08 Feb 2013 20:48:26 +0000

Hello HumpA,

You blog is very nice, and so your job!
Please, could you tell me how to configure the Codec-Adaptive Wireless Relay? I have a 315Mhz transmitter on my Arduino and I would like to switch the relay on and off. Also, can I use the same transmitter to control more than one relay?

Thanks in advance,
Sam.

Comment on HomeZone / Cinema Update 6 – Web App Control by Luis

Luis — Sat, 02 Feb 2013 20:32:39 +0000

Hello,
I am doing a similar project but I would like to upload the app made with sencha in the arduino. However I do not have any idea to upload the html5 code and their images. Is it possible to upload in the sd card of the ethernet shield? Thank you very much.

Comment on RaspberryPi and MQTT Mosquitto by Matt

Matt — Thu, 06 Dec 2012 01:14:36 +0000

trying to install mosquitto on my Raspberry Pi….I got it, but I had to disable TLS-PSK in the configs (which is fine for now) – anybody know of a good ssl package for the Pi if I decide to recompile ?

btw, instructions above for the Pi were perfect (other than the error for no ssl) – thanks !

–Matt

Comment on Home Cinema part 4 – custom controls. by HomeZ Cinema Update 6 – Web App Control | HumpA Blog

HomeZ Cinema Update 6 – Web App Control | HumpA Blog — Sun, 25 Nov 2012 14:47:43 +0000

[...] the RCSwitch / IRremote below is a photo of what it looks like but feel free to check out the older post / [...]

Comment on HomeZone Update: Now controls my DomoticHome 315mhz Transmitter! by Home Cinema part 4 with Homezone! | HumpA Blog

Home Cinema part 4 with Homezone! | HumpA Blog — Wed, 24 Oct 2012 21:31:23 +0000

[...] a solution to switch everything on and off from my phone… so I got to work on extending my Arduino DomoticHome Transmitter to include Infra Red [...]

Comment on Home Cinema Setup Part 1 by Home Cinema part 4 with Homezone! | HumpA Blog

Home Cinema part 4 with Homezone! | HumpA Blog — Wed, 24 Oct 2012 21:26:45 +0000

[...] yet, so for the moment I am just using the wall… I have to say I am really happy with my custom mount … I did some cable management and now I am just waiting for my HDMI extender to arrive from [...]